LinuxReviws.org --get your your Linux knowledge
> Linux Reviews > Manual Pages (man) >

yum


  1. yum.8.man


1. yum.8.man

Manpage of yum

yum

Section: (8)
Updated:
Index Return to Main Contents
 

NAME

yum - Yellowdog Updater Modified  

SYNOPSIS

yum [options] [command] [package ...]  

DESCRIPTION

yum is an interactive, rpm based, package manager. It can automatically perform system updates, including dependency analysis and obsolete processing based on "repository" metadata. It can also perform installation of new packages, removal of old packages and perform queries on the installed and/or available packages among many other commands/services (see below). yum is similar to other high level package managers like apt-get and smart.

While there are some graphical interfaces directly to the yum code, more recent graphical interface development is happening with PackageKit and the gnome-packagekit application.

command is one of:
* install package1 [package2] [...]
* update [package1] [package2] [...]
* check-update
* upgrade [package1] [package2] [...]
* remove | erase package1 [package2] [...]
* list [...]
* info [...]
* provides | whatprovides feature1 [feature2] [...]
* clean [ packages | headers | metadata | dbcache | all ]
* makecache
* groupinstall group1 [group2] [...]
* groupupdate group1 [group2] [...]
* grouplist [hidden] [groupwildcard] [...]
* groupremove group1 [group2] [...]
* groupinfo group1 [...]
* search string1 [string2] [...]
* shell [filename]
* resolvedep dep1 [dep2] [...]
* localinstall rpmfile1 [rpmfile2] [...]
* localupdate rpmfile1 [rpmfile2] [...]
* reinstall package1 [package2] [...]
* downgrade package1 [package2] [...]
* deplist package1 [package2] [...]
* repolist [all|enabled|disabled]
* help [command]

Unless the --help or -h option is given, one of the above commands must be present.

Repository configuration is honored in all operations.

install
Is used to install the latest version of a package or group of packages while ensuring that all dependencies are satisfied. If no package matches the given package name(s), they are assumed to be a shell glob and any matches are then installed. If the name starts with an @ character the rest of the name is used as though passed to the groupinstall command. If the name is a file, then install works like localinstall. If the name doesn't match a package, then package "provides" are searched (Eg. "_sqlitecache.so()(64bit)") as are filelists (Eg. "/usr/bin/yum"). Also note that for filelists, wildcards will match multiple packages.
update
If run without any packages, update will update every currently installed package. If one or more packages or package globs are specified, Yum will only update the listed packages. While updating packages, yum will ensure that all dependencies are satisfied. If the packages or globs specified match to packages which are not currently installed then update will not install them. update operates on groups, files, provides and filelists just like the "install" command.

If the main obsoletes configure option is true (default) or the --obsoletes flag is present yum will include package obsoletes in its calculations - this makes it better for distro-version changes, for example: upgrading from somelinux 8.0 to somelinux 9.

check-update
Implemented so you could know if your machine had any updates that needed to be applied without running it interactively. Returns exit value of 100 if there are packages available for an update. Also returns a list of the pkgs to be updated in list format. Returns 0 if no packages are available for update. Returns 1 if an error occurred. Running in verbose mode also shows obsoletes.
upgrade
Is the same as the update command with the --obsoletes flag set. See update for more details.
remove or erase
Are used to remove the specified packages from the system as well as removing any packages which depend on the package being removed. remove operates on groups, files, provides and filelists just like the "install" command.
list
Is used to list various information about available packages; more complete details are available in the List Options section below.
provides or whatprovides
Is used to find out which package provides some feature or file. Just use a specific name or a file-glob-syntax wildcards to list the packages available or installed that provide that feature or file.
search
Is used to find any packages matching a string in the description, summary and package name fields of an rpm. Useful for finding a package you do not know by name but know by some word related to it.
info
Is used to list a description and summary information about available packages; takes the same arguments as in the List Options section below.
clean
Is used to clean up various things which accumulate in the yum cache directory over time. More complete details can be found in the Clean Options section below.
makecache
Is used to download and make usable all the metadata for the currently enabled yum repos.
groupinstall
Is used to install all of the individual packages in a group, of the specified types (this works as if you'd taken each of those package names and put them on the command line for a "yum install" command).
 The group_package_types configuration option specifies which types will be installed.
groupupdate
Is just an alias for groupinstall, which will do the right thing because "yum install X" and "yum update X" do the same thing, when X is already installed.
grouplist
Is used to list the available groups from all yum repos. Groups are marked as "installed" if all mandatory packages are installed, or if a group doesn't have any mandatory packages then it is installed if any of the optional or default package are installed. The optional "hidden" argument will also list groups marked as not being "user visible". If you pass the -v option, to enable verbose mode, then the groupid's are displayed.
groupremove
Is used to remove all of the packages in a group, unlike "groupinstall" this will remove everything regardless of group_package_types. It is worth pointing out that packages can be in more than one group, so "groupinstall X Y" followed by "groupremove Y" does not do give you the same result as "groupinstall X".
groupinfo
Is used to give the description and package list of a group (and which type those packages are marked as). Note that you can use the yum-filter-data and yum-list-data plugins to get/use the data the other way around (Ie. what groups own packages need updating). If you pass the -v option, to enable verbose mode, then the package names are matched against installed/available packages similar to the list command.
shell
Is used to enter the 'yum shell', when a filename is specified the contents of that file is executed in yum shell mode. See yum-shell(8) for more info
resolvedep
Is used to list packages providing the specified dependencies, at most one package is listed per dependency.
localinstall
Is used to install a set of local rpm files. If required the enabled repositories will be used to resolve dependencies. Note that the install command will do a local install, if given a filename.
localupdate
Is used to update the system by specifying local rpm files. Only the specified rpm files of which an older version is already installed will be installed, the remaining specified packages will be ignored. If required the enabled repositories will be used to resolve dependencies. Note that the update command will do a local install, if given a filename.
reinstall
Will reinstall the identically versioned package as is currently installed. This does not work for "installonly" packages, like Kernels. reinstall operates on groups, files, provides and filelists just like the "install" command.
downgrade
Will try and downgrade a package from the version currently installed to the previously highest version (or the specified version). The depsolver will not necessarily work, but if you specify all the packages it should work (and thus. all the simple cases will work). Also this does not work for "installonly" packages, like Kernels. downgrade operates on groups, files, provides and filelists just like the "install" command.
deplist
Produces a list of all dependencies and what packages provide those dependencies for the given packages.
repolist
Produces a list of configured repositories. The default is to list all enabled repositories. If you pass -v, for verbose mode, more information is listed.
help
Produces help, either for all commands or if given a command name then the help for that particular command.

 

GENERAL OPTIONS

Most command line options can be set using the configuration file as well and the descriptions indicate the necessary configuration option to set.

-h, --help
Help; display a help message and then quit.
-y
Assume yes; assume that the answer to any question which would be asked is yes.
Configuration Option: assumeyes
-c [config file]
Specifies the config file location - can take http, ftp urls and local file paths.
-q, --quiet
Run without output. Note that you likely also want to use -y.
-v, --verbose
Run with a lot of debugging output.
-d [number]
Sets the debugging level to [number] - turns up or down the amount of things that are printed. Practical range: 0 - 10
Configuration Option: debuglevel
-e [number]
Sets the error level to [number] Practical range 0 - 10. 0 means print only critical errors about which you must be told. 1 means print all errors, even ones that are not overly important. 1+ means print more errors (if any) -e 0 is good for cron jobs.
Configuration Option: errorlevel
-R [time in minutes]
Sets the maximum amount of time yum will wait before performing a command - it randomizes over the time.
-C
Tells yum to run entirely from cache - does not download or update any headers unless it has to to perform the requested action.
--version
Reports the yum version number and exits.
--showduplicates
Doesn't limit packages to their latest versions in the info, list and search commands (will also affect plugins which use the doPackageLists() API).
--installroot=root
Specifies an alternative installroot, relative to which all packages will be installed.
Configuration Option: installroot
--enablerepo=repoidglob
Enables specific repositories by id or glob that have been disabled in the configuration file using the enabled=0 option.
Configuration Option: enabled
--disablerepo=repoidglob
Disables specific repositories by id or glob.
Configuration Option: enabled
--obsoletes
This option only has affect for an update, it enables yum's obsoletes processing logic. For more information see the update command above.
Configuration Option: obsoletes
-x, --exclude=package
Exclude a specific package by name or glob from updates on all repositories. Configuration Option: exclude
--color=[always|auto|never]
Display colorized output automatically, depending on the output terminal, always (using ANSI codes) or never. Note that some commands (Eg. list and info) will do a little extra work when color is enabled. Configuration Option: color
--disableexcludes=[all|main|repoid]
Disable the excludes defined in your config files. Takes one of three options:
all == disable all excludes
main == disable excludes defined in [main] in yum.conf
repoid == disable excludes defined for that repo
--disableplugin=plugin
Run with one or more plugins disabled, the argument is a comma separated list of wildcards to match against plugin names.
--noplugins
Run with all plugins disabled.
Configuration Option: plugins
--nogpgcheck
Run with gpg signature checking disabled.
Configuration Option: gpgcheck
--skip-broken
Resolve depsolve problems by removing packages that are causing problems from the transaction.
Configuration Option: skip_broken

-t, --tolerant
This option currently does nothing.
 

LIST OPTIONS

The following are the ways which you can invoke yum in list mode. Note that all list commands include information on the version of the package.
yum list [all | glob_exp1] [glob_exp2] [...]
List all available and installed packages.
yum list available [glob_exp1] [...]
List all packages in the yum repositories available to be installed.
yum list updates [glob_exp1] [...]
List all packages with updates available in the yum repositories.
yum list installed [glob_exp1] [...]
List the packages specified by args. If an argument does not match the name of an available package, it is assumed to be a shell-style glob and any matches are printed.
yum list extras [glob_exp1] [...]
List the packages installed on the system that are not available in any yum repository listed in the config file.
yum list obsoletes [glob_exp1] [...]
List the packages installed on the system that are obsoleted by packages in any yum repository listed in the config file.
yum list recent
List packages recently added into the repositories.
Specifying package names
All the list options mentioned above take file-glob-syntax wildcards or package names as arguments, for example yum list available 'foo*' will list all available packages that match 'foo*'. (The single quotes will keep your shell from expanding the globs.)

 

CLEAN OPTIONS

The following are the ways which you can invoke yum in clean mode. Note that "all files" in the commands below means "all files in currently enabled repositories". If you want to also clean any (temporarily) disabled repositories you need to use --enablerepo='*' option.

yum clean expire-cache
Eliminate the local data saying when the metadata and mirrorlists were downloaded for each repo. This means yum will revalidate the cache for each repo. next time it is used. However if the cache is still valid, nothing significant was deleted.

yum clean packages
Eliminate any cached packages from the system. Note that packages are not automatically deleted after they are downloaded.

yum clean headers
Eliminate all of the header files which yum uses for dependency resolution.

yum clean metadata
Eliminate all of the files which yum uses to determine the remote availability of packages. Using this option will force yum to download all the metadata the next time it is run.

yum clean dbcache
Eliminate the sqlite cache used for faster access to metadata. Using this option will force yum to recreate the cache the next time it is run.

yum clean all
Runs yum clean packages and yum clean headers, yum clean metadata and yum clean dbcache as above.

 

MISC

Specifying package names
A package can be referred to for install,update,list,remove etc with any of the following:

name
name.arch
name-ver
name-ver-rel
name-ver-rel.arch
name-epoch:ver-rel.arch
epoch:name-ver-rel.arch
For example: yum remove kernel-2.4.1-10.i686

 

PLUGINS

Yum can be extended through the use of plugins. A plugin is a Python ".py" file which is installed in one of the directories specified by the pluginpath option in yum.conf. For a plugin to work, the following conditions must be met:

1. The plugin module file must be installed in the plugin path as just described.

2. The global plugins option in /etc/yum/yum.conf must be set to `1'.

3. A configuration file for the plugin must exist in /etc/yum/pluginconf.d/<plugin_name>.conf and the enabled setting in this file must set to `1'. The minimal content for such a configuration file is:

[main]
enabled = 1

See the yum.conf(5) man page for more information on plugin related configuration options.

 

FILES

/etc/yum.conf
/etc/yum.repos.d/
/etc/yum/pluginconf.d/
/var/cache/yum/

 

SEE ALSO

pkcon (1)
yum.conf (5)
yum-updatesd (8)
package-cleanup (1)
repoquery (1)
yum-complete-transaction (1)
yumdownloader (1)
yum-utils (1)
http://linux.duke.edu/yum/
http://wiki.linux.duke.edu/YumFaq
yum search yum

 

AUTHORS

See the Authors file included with this program.

 

BUGS

There of course aren't any bugs, but if you find any, you should first consult the Faq mentioned above and then email the mailing list: yum@lists.linux.duke.edu or filed in bugzilla.


 

Index

NAME
SYNOPSIS
DESCRIPTION
GENERAL OPTIONS
LIST OPTIONS
CLEAN OPTIONS
MISC
PLUGINS
FILES
SEE ALSO
AUTHORS
BUGS

This document was created by man2html using the manual pages.
Time: 17:33:11 GMT, October 23, 2013

Meet new people