LinuxReviws.org --get your your Linux knowledge
> Linux Reviews > Manual Pages (man) >

readdir

read directory entry


  1. readdir.2.man
  2. readdir.3.man


1. readdir.2.man

Manpage of READDIR

READDIR

Section: Linux Programmer's Manual (2)
Updated: 2008-10-02
Index Return to Main Contents
 

NAME

readdir - read directory entry  

SYNOPSIS


int readdir(unsigned int fd, struct old_linux_dirent *dirp,
            unsigned int count);
 

DESCRIPTION

This is not the function you are interested in. Look at readdir(3) for the POSIX conforming C library interface. This page documents the bare kernel system call interface, which is superseded by getdents(2).

readdir() reads one old_linux_dirent structure from the directory referred to by the file descriptor fd into the buffer pointed to by dirp. The argument count is ignored; at most one old_linux_dirent structure is read.

The old_linux_dirent structure is declared as follows:

struct old_linux_dirent {
    long  d_ino;              /* inode number */
    off_t d_off;              /* offset to this old_linux_dirent */
    unsigned short d_reclen;  /* length of this d_name */
    char  d_name[NAME_MAX+1]; /* filename (null-terminated) */
}

d_ino is an inode number. d_off is the distance from the start of the directory to this old_linux_dirent. d_reclen is the size of d_name, not counting the terminating null byte. d_name is a null-terminated filename.  

RETURN VALUE

On success, 1 is returned. On end of directory, 0 is returned. On error, -1 is returned, and errno is set appropriately.  

ERRORS

EBADF
Invalid file descriptor fd.
EFAULT
Argument points outside the calling process's address space.
EINVAL
Result buffer is too small.
ENOENT
No such directory.
ENOTDIR
File descriptor does not refer to a directory.
 

CONFORMING TO

This system call is Linux-specific.  

NOTES

Glibc does not provide a wrapper for this system call; call it using syscall(2). You will need to define the old_linux_dirent structure yourself.  

SEE ALSO

getdents(2), readdir(3)  

COLOPHON

This page is part of release 3.32 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
CONFORMING TO
NOTES
SEE ALSO
COLOPHON

This document was created by man2html using the manual pages.
Time: 17:32:10 GMT, October 23, 2013

2. readdir.3.man

Manpage of READDIR

READDIR

Section: Linux Programmer's Manual (3)
Updated: 2010-09-10
Index Return to Main Contents
 

NAME

readdir, readdir_r - read a directory  

SYNOPSIS

#include <dirent.h>

struct dirent *readdir(DIR *dirp);

int readdir_r(DIR *dirp, struct dirent *entry, struct dirent **result);

Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

readdir_r():

_POSIX_C_SOURCE >= 1 || _XOPEN_SOURCE || _BSD_SOURCE || _SVID_SOURCE || _POSIX_SOURCE
 

DESCRIPTION

The readdir() function returns a pointer to a dirent structure representing the next directory entry in the directory stream pointed to by dirp. It returns NULL on reaching the end of the directory stream or if an error occurred.

On Linux, the dirent structure is defined as follows:

struct dirent {
    ino_t          d_ino;       /* inode number */
    off_t          d_off;       /* offset to the next dirent */
    unsigned short d_reclen;    /* length of this record */
    unsigned char  d_type;      /* type of file; not supported
                                   by all file system types */
    char           d_name[256]; /* filename */
};

The only fields in the dirent structure that are mandated by POSIX.1 are: d_name[], of unspecified size, with at most NAME_MAX characters preceding the terminating null byte; and (as an XSI extension) d_ino. The other fields are unstandardized, and not present on all systems; see NOTES below for some further details.

The data returned by readdir() may be overwritten by subsequent calls to readdir() for the same directory stream.

The readdir_r() function is a reentrant version of readdir(). It reads the next directory entry from the directory stream dirp, and returns it in the caller-allocated buffer pointed to by entry. (See NOTES for information on allocating this buffer.) A pointer to the returned item is placed in *result; if the end of the directory stream was encountered, then NULL is instead returned in *result.  

RETURN VALUE

On success, readdir() returns a pointer to a dirent structure. (This structure may be statically allocated; do not attempt to free(3) it.) If the end of the directory stream is reached, NULL is returned and errno is not changed. If an error occurs, NULL is returned and errno is set appropriately.

The readdir_r() function returns 0 on success. On error, it returns a positive error number (listed under ERRORS). If the end of the directory stream is reached, readdir_r() returns 0, and returns NULL in *result.  

ERRORS

EBADF
Invalid directory stream descriptor dirp.
 

CONFORMING TO

SVr4, 4.3BSD, POSIX.1-2001.  

NOTES

Only the fields d_name and d_ino are specified in POSIX.1-2001. The remaining fields are available on many, but not all systems. Under glibc, programs can check for the availability of the fields not defined in POSIX.1 by testing whether the macros _DIRENT_HAVE_D_NAMLEN, _DIRENT_HAVE_D_RECLEN, _DIRENT_HAVE_D_OFF, or _DIRENT_HAVE_D_TYPE are defined.

Other than Linux, the d_type field is available mainly only on BSD systems. This field makes it possible to avoid the expense of calling lstat(2) if further actions depend on the type of the file. If the _BSD_SOURCE feature test macro is defined, then glibc defines the following macro constants for the value returned in d_type:

DT_BLK
This is a block device.
DT_CHR
This is a character device.
DT_DIR
This is a directory.
DT_FIFO
This is a named pipe (FIFO).
DT_LNK
This is a symbolic link.
DT_REG
This is a regular file.
DT_SOCK
This is a UNIX domain socket.
DT_UNKNOWN
The file type is unknown.

If the file type could not be determined, the value DT_UNKNOWN is returned in d_type.

Currently, only some file systems (among them: Btrfs, ext2, ext3, and ext4) have full support returning the file type in d_type. All applications must properly handle a return of DT_UNKNOWN.

Since POSIX.1 does not specify the size of the d_name field, and other nonstandard fields may precede that field within the dirent structure, portable applications that use readdir_r() should allocate the buffer whose address is passed in entry as follows:


len = offsetof(struct dirent, d_name) +
          pathconf(dirpath, _PC_NAME_MAX) + 1
entryp = malloc(len);

(POSIX.1 requires that d_name is the last field in a struct dirent.)  

SEE ALSO

getdents(2), read(2), closedir(3), dirfd(3), ftw(3), offsetof(3), opendir(3), rewinddir(3), scandir(3), seekdir(3), telldir(3)  

COLOPHON

This page is part of release 3.32 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
CONFORMING TO
NOTES
SEE ALSO
COLOPHON

This document was created by man2html using the manual pages.
Time: 17:32:10 GMT, October 23, 2013

ENGLISH - ENGLISH - ENGLISH - ja - nl - pl

Meet new people