LinuxReviws.org --get your your Linux knowledge
> Linux Reviews > Manual Pages (man) >

fstab

static information about the filesystems


  1. fstab.5.man


1. fstab.5.man

Manpage of FSTAB

FSTAB

Section: Linux Programmer's Manual (5)
Updated: August 2010
Index Return to Main Contents
 

NAME

fstab - static information about the filesystems  

SYNOPSIS

/etc/fstab  

DESCRIPTION

The file fstab contains descriptive information about the various file systems. fstab is only read by programs, and not written; it is the duty of the system administrator to properly create and maintain this file. Each filesystem is described on a separate line; fields on each line are separated by tabs or spaces. Lines starting with '#' are comments, blank lines are ignored. The order of records in fstab is important because fsck(8), mount(8), and umount(8) sequentially iterate through fstab doing their thing.

The first field (fs_spec).

This field describes the block special device or remote filesystem to be mounted.

For ordinary mounts it will hold (a link to) a block special device node (as created by mknod(8)) for the device to be mounted, like `/dev/cdrom' or `/dev/sdb7'. For NFS mounts one will have <host>:<dir>, e.g., `knuth.aeb.nl:/'. For procfs, use `proc'.

Instead of giving the device explicitly, one may indicate the (ext2 or xfs) filesystem that is to be mounted by its UUID or volume label (cf. e2label(8) or xfs_admin(8)), writing LABEL=<label> or UUID=<uuid>, e.g., `LABEL=Boot' or `UUID=3e6be9de-8139-11d1-9106-a43f08d823a6'. This will make the system more robust: adding or removing a SCSI disk changes the disk device name but not the filesystem volume label.

Note that mount(8) uses UUIDs as strings. The string representation of the UUID should be based on lower case characters.

The second field (fs_file).

This field describes the mount point for the filesystem. For swap partitions, this field should be specified as `none'. If the name of the mount point contains spaces these can be escaped as `\040'.

The third field (fs_vfstype).

This field describes the type of the filesystem. Linux supports lots of filesystem types, such as adfs, affs, autofs, coda, coherent, cramfs, devpts, efs, ext2, ext3, hfs, hpfs, iso9660, jfs, minix, msdos, ncpfs, nfs, ntfs, proc, qnx4, reiserfs, romfs, smbfs, sysv, tmpfs, udf, ufs, umsdos, vfat, xenix, xfs, and possibly others. For more details, see mount(8).

For the filesystems currently supported by the running kernel, see /proc/filesystems.

An entry swap denotes a file or partition to be used for swapping, cf. swapon(8). An entry ignore causes the line to be ignored. This is useful to show disk partitions which are currently unused. An entry none is useful for bind or move mounts.

mount(8) and umount(8) support filesystem subtypes. The subtype is defined by '.subtype' suffix. For example 'fuse.sshfs'. It's recommended to use subtype notation rather than add any prefix to the first fstab field (for example 'sshfs#example.com' is depreacated).

The fourth field (fs_mntops).

This field describes the mount options associated with the filesystem.

It is formatted as a comma separated list of options. It contains at least the type of mount plus any additional options appropriate to the filesystem type. For documentation on the available mount options, see mount(8). For documentation on the available swap options, see swapon(8).

Basic file system independent options are:

defaults
use default options: rw, suid, dev, exec, auto, nouser, and async.
noauto
do not mount when "mount -a" is given (e.g., at boot time)
user
allow a user to mount
owner
allow device owner to mount
comment
for use by fstab-maintaining programs
nofail
do not report errors for this device if it does not exist.

The fifth field (fs_freq).

This field is used for these filesystems by the dump(8) command to determine which filesystems need to be dumped. If the fifth field is not present, a value of zero is returned and dump will assume that the filesystem does not need to be dumped.

The sixth field (fs_passno).

This field is used by the fsck(8) program to determine the order in which filesystem checks are done at reboot time. The root filesystem should be specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. Filesystems within a drive will be checked sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism available in the hardware. If the sixth field is not present or zero, a value of zero is returned and fsck will assume that the filesystem does not need to be checked.

The proper way to read records from fstab is to use the routines getmntent(3) or libmount.  

FILES

/etc/fstab, <fstab.h>  

SEE ALSO

mount(8), swapon(8), fs(5), nfs(5), xfs(5), proc(5), getmntent(3)  

HISTORY

The ancestor of this fstab file format appeared in 4.0BSD.  

AVAILABILITY

This man page is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
FILES
SEE ALSO
HISTORY
AVAILABILITY

This document was created by man2html using the manual pages.
Time: 17:31:01 GMT, October 23, 2013

cs - ENGLISH - ENGLISH - ENGLISH - ENGLISH - ja - pl

Meet new people