> Linux Reviews > Manual Pages (man) >

feh

feh.1.man

1. feh.1.man

Manpage of FEH

FEH

Section: User Commands (1)
Index Return to Main Contents

BSD mandoc

NAME

feh - image viewer and cataloguer

SYNOPSIS

[options ] files or directories ...

VERSION

This manual documents feh 1.16.2

Compile-time switches: libcurl support enabled, Xinerama support enabled

DESCRIPTION

is a mode-based image viewer. It is especially aimed at commandline users who need a fast image viewer without huge GUI dependencies, though it can also be started by (graphical) file managers to view an image.

supports filelists, various image sorting modes, image captions and more. Configurable keyboard shortcuts are used to control it; the mouse is also supported, but only required for very few actions.

can also be used as wallpaper setter.

MODES

is based on various modes, which are selected at startup by comandline options.

Slideshow mode is the default. It opens one window and displays the first image in it, the keyboard and mouse can be used to change slides (images) In slideshow mode, images can be deleted either from the filelist or from the disk, the new filelist can then be saved to the disk and reopened at a later time.

Montage mode forms a montage from the filelist. The resulting image can be viewed or saved, and its size can be limited by height, width or both.

Index mode forms an index print from the filelist. Image thumbnails are shown along with the filename, filesize and pixel size, printed using a truetype font of your choice. The resulting image can be viewed or saved, and its size can be limited by height, width or both.

Thumbnail mode is like index mode, but the mini-images are clickable and open the selected image in a new window.

Multiwindow mode shows images in multiple windows, instead of as a slideshow in one window. Don't use with a large filelist ;)

List mode doesn't display images. Outputs an ls - style listing of the files in the filelist, including image info such as size, pixels, type, etc. Customlist mode will display whatever image info you want, in the format you choose.

can also list either all the loadable files in a filelist or all the unloadable files. Useful for preening a directory.

OPTIONS

-A , --action [flag action ]

Specify a shell command as an action to perform on the image. In slideshow or multiwindow mode, the action will be run when the action_0 key is pressed, in list mode, it will be run for each file. In loadable/unloadable mode, it will be run for each loadable/unloadable file, respectively.

If flag is Qq ; , will reload the current image instead of switching to the next one after executing the action.

The action will be executed by /bin/sh. Use format specifiers to refer to image info. See Sx FORMAT SPECIFIERS for examples. E.g. Qq feh -A mv ~/images/%n * . In slideshow mode, the next image will be shown after running the action, in multiwindow mode, the window will be closed.

--action1 .. --action9

Extra actions which can be set and triggered using the appropiate number key.

-Z , --auto-zoom

Zoom pictures to screen size in fullscreen / fixed geometry mode.

-x , --borderless

Create borderless windows.

-P , --cache-thumbnails

Enable thumbnail caching in ~/.thumbnails Only works with thumbnails <= 256x256 pixels.

-K , --caption-path path

Path to directory containing image captions. This turns on caption viewing, and if captions are found in path which is relative to the directory of each image, they are overlayed on the displayed image. E.g. with caption path Qq captions/ , and viewing image Qq images/foo.jpg , the caption will be looked for in Qq images/captions/foo.jpg.txt .

-L , --customlist format

Don't display images, print image info according to format instead. See Sx FORMAT SPECIFIEDRS .

--cycle-once

Exit feh after one loop through the slideshow.

-G , --draw-actions

Draw the defined actions and what they do at the top-left of the image.

-d , --draw-filename

Draw the filename at the top-left of the image.

--draw-tinted

Show overlay texts (as created by --draw-filename et al ) on a semi-transparent background to improve their readability

-f , --filelist file

This option is similar to the playlists used by music software. If file exists, it will be read for a list of files to load, in the order they appear. The format is a list of image filenames, absolute or relative to the current directory, one filename per line.

If file doesn't exist, it will be created from the internal filelist at the end of a viewing session. This is best used to store the results of complex sorts (-Spixels for example ) for later viewing.

Any changes to the internal filelist (such as deleting a file or it being pruned for being unloadable) will be saved to file when exits. You can add files to filelists by specifying them on the commandline when also specifying the list.

If file is Qq - , will read the filelist from its standard input.

-e , --font font

Set global font. Should be a truetype font, resident in the current directory or the font directory, and should be defined in the form fontname/points, like Qq myfont/12 .

-C , --fontpath path

Specify path as extra directory in which to search for fonts; can be used multiple times to add multiple paths.

--force-aliasing

Disable antialiasing for zooming, background setting etc.

-I , --fullindex

Same as Index mode, but you also get image size and dimensions printed below each thumbnail. Enables Sx MONTAGE MODE OPTIONS .

-F , --fullscreen

Make the window fullscreen. Note that in this mode, large images will always be scaled down to fit the screen, --zoom zoom only affects smaller images and never scales larger than necessary to fit the screen size. The only exception is a zoom of 100, in which case images will always be shown at 100% zoom, no matter their dimensions.

-g , --geometry width x height [+ x + y ]

Limit (and don't change) the window size. Takes an X-style geometry string like 640x480 with optional +x+y window offset. Note that larger images will be zoomed out to fit, but you can see them at 1:1 by clicking the zoom button.

-Y , --hide-pointer

Hide the pointer (useful for slideshows)

-B , --image-bg style

Use style as background for transparent image parts and the like. Accepted values: checks (default), white, black.

-i , --index

Enable Index mode. Index mode is similar to montage mode, and accepts the same options. It creates an index print of thumbails, printing the image name beneath each thumbnail. Index mode enables certain other options, see Sx INDEX MODE OPTIONS and Sx MONTAGE MODE OPTIONS .

--index-dim bool

Toggle showing image dimensions in thumbnail/index mode.

--index-name bool

Toggle showing the filename in thumbnail/index mode.

--index-size bool

Toggle showing the filesize in thumbnail/index mode.

--info commandline

Execute commandline and display its output in the bottom left corner of the image. Can be used to display e.g. image dimensions or EXIF information. Supports Sx FORMAT SPECIFIERS .

-k , --keep-http

When viewing files using HTTP, normally deletes the local copies after viewing, or, if caching, on exit. This option prevents this so that you get to keep the local copies. They will be in /tmp with Qq Nm in the name.

-l , --list

Don't display images. Analyse them and display an ls(1)-Nostyle listing. Useful in scripts to hunt out images of a certain size/resolution/type etc.

-U , --loadable

Don't display images. Just print out their names if imlib2 can successfully load them.

-M , --menu-font font

Use font (truetype, with size, like Qq yudit/12 ) as menu font.

-m , --montage

Enable montage mode. Montage mode creates a new image consisting of a grid of thumbnails of the images in the filelist. When montage mode is selected, certain other options become available. See Sx MONTAGE MODE OPTIONS .

-w , --multiwindow

Disable slideshow mode. With this setting, instead of opening multiple files in slideshow mode, multiple windows will be opened; one per file.

--no-jump-on-resort

Don't jump to the first image after resorting the filelist.

-N , --no-menus

Don't load or show any menus.

--no-screen-clip

By default, window sizes are limited to the screen size. With this option, windows will have the size of the image inside them. Note that they may become very large this way, making them unmanageable in certain window managers.

--no-xinerama

Disable Xinerama support. Only makes sense when you have Xinerama support compiled in.

-j , --output-dir directory

Save files to directory (only useful with -k)

-p , --preload

Preload images. This doesn't mean hold them in RAM, it means run through them and eliminate unloadable images first. Otherwise they will be removed as you flick through. This also analyses the images to get data for use in sorting, such as pixel size, type etc. A preload run will be automatically performed if you specify one of these sort modes.

-q , --quiet

Don't report non-fatal errors for failed loads. Verbose and quiet modes are not mutually exclusive, the first controls informational messages, the second only errors.

-z , --randomize

When viewing multiple files in a slideshow, randomize the file list before displaying.

-r , --recursive

Recursively expand any directories in the commandline arguments to the content of those directories, all the way down to the bottom level.

-R , --reload int

Reload filelist and current image after int seconds. Useful for viewing HTTP webcams or frequently changing directories. (Note that the filelist reloading is still experimental.)

If an image is removed, feh will either show the next one or quit. However, if an image still exists, but can no longer be loaded, feh will continue to try loading it.

-n , --reverse

Reverse the sort order. Use this to invert the order of the filelist. E.g. to sort in reverse width order, use -nSwidth

-. , --scale-down

When not in fullscreen: Scale images to screen size if they are too big.

-D , --slideshow-delay float

For slideshow mode, wait float seconds between automatically changing slides. Useful for presentations. Specify a negative number to set the delay (which will then be float * (-1) ) but start feh in paused mode.

-S , --sort sort_type

The file list may be sorted according to image parameters. Allowed sort types are: name, filename, width, height, pixels, size, format. For sort modes other than name or filename, a preload run will be necessary, causing a delay proportional to the number of images in the list.

-| , --start-at filename

Start the filelist at filename See Sx USAGE EXAMPLES .

-T , --theme theme

Load options from config file with name theme - see Sx THEMES CONFIG SYNTAX for more info. Note that commandline options always override theme options. The theme can also be set via the program name (e.g. with symlinks) so by default will look for a Qq Nm theme.

-t , --thumbnails

Same as Index mode, but the thumbnails are clickable image launchers. Note that --fullscreen does not affect the thumbnail window. It does, however, work for the image windows launched from thumbnail mode. Also supports Sx MONTAGE MODE OPTIONS .

-~ , --thumb-title string

Set title for windows opened from thumbnail mode. See also Sx FORMAT SPECIFIERS .

-^ , --title title

Set window title. Applies to all windows except those opened from thumbnail mode. See Sx FORMAT SPECIFIERS .

-u , --unloadable

Don't display images. Just print out their names if imlib2 can NOT successfully load them.

-V , --verbose

output useful information, progress bars, etc.

-v , --version

output version information and exit.

--zoom percent | max | fill

Zoom images by percent when in full screen mode or when window geometry is fixed. When combined with --auto-zoom zooming will be limited to the specified percent Specifying max is like setting --auto-zoom using fill makes feh zoom the image like the --bg-fill mode.

BUTTON OPTIONS

-0 , --reload-button int: Set button to reload the image (default: 0)
-1 , --pan-button int: Set button to pan the image (hold button down and move mouse to move the image) When the mouse is not moved, advances to the next image in slideshow mode. (default: 1 , usually the left button)
-2 , --zoom-button int: Set button to enable zoom mode (default: 2 , usually the middle button)
-3 , --menu-button int: Set button to activate the menu. (default: 3 , usually the right button)
--menu-ctrl-mask: Require CTRL+Button for menu activation.
-4 , --prev-button int: Set button to switch to the previous image in slideshow mode (default: 4 , usually Aq mousewheel up )
-5 , --next-button int: Set button to switch to the next image in slideshow mode (default: 5 , usually Aq mousewheel down )
-8 , --rotate-button int: Use CTRL+Button to rotate the current image (default : 2)
--no-rotate-ctrl-mask: Don't require CTRL+Button for rotation - just use the button.
-9 , --blur-button int: Use CTRL+Button for blurring (default : 1)
--no-blur-ctrl-mask: Don't require CTRL+Button for blurring - just use the button.

MONTAGE MODE OPTIONS

These additional options can be used for index, montage and (partially) thumbnail mode.

-a , --alpha int: When drawing thumbnails onto the background, set their transparency level to int (0 - 255)
-b , --bg file | trans: Use file as background for your montage. With this option specified, the montage size will default to the size of file if no size restrictions were specified. Alternatively, if file is Qq trans , the background will be made transparent.
-X , --ignore-aspect: By default, the montage thumbnails will retain their aspect ratios, while fitting into thumb-width/-height. This options forces them to be the size set by --thumb-width and --thumb-height This will prevent any empty space in the final montage.
-H , --limit-height pixels: Limit the height of the montage. These options can be used together to define the image size exactly, or separately. If only one is specified, the other is calculated from the number of files specified and the size of the thumbnails. The default is to limit width to 800 pixels and calculate the height as necessary.
-W , --limit-width pixels: Limit the width of the montage.
-o , --output file: Save the created montage to file
-O , --output-only file: Just save the created montage to file without displaying it.
-s , --stretch: Normally, if an image is smaller than the specified thumbnail size, it will not be enlarged. If this option is set, the image will be scaled up to fit the thumnail size. Aspect ratio will be maintained unles --ignore-aspect is specified.
-E , --thumb-height pixels: Set thumbnail height.
-y , --thumb-width pixels: Set thumbnail width.
-J , --thumb-redraw n: Only relevant for --thumbnails Redraw thumbnail window every n images. In <= 1.5, the thumbnail image used to be redrawn after every computed thumbnail (so, it updated immediately) However, since the redrawing takes quite long (especially for thumbnail mode on a large filelist) this turned out to be a major performance penalty. As a workaround, the thumbnail image is redrawn every 10th image now by default. Set n = 1 to get the old behaviour, n = 0 will only redraw once all thumbnails are loaded.

INDEX MODE OPTIONS

-@ , --title-font font: Set font to print a title on the index, if no font is specified, no title will be printed.

BACKGROUND SETTING

can also be used as a background setter. It will store the command line necessary to set the background in ~/.fehbg so to have your background restored everytime you start X, you can add Qq eval $(cat ~/.fehbg) to your X startup script (like ~/.xinitrc )

Note that all options except --bg-tile support Xinerama. So, if you have multiple screens connected and use e.g. --bg-center will center the image on each screen. You can use --no-xinerama to treat the whole X display as one screen.

The following options control how exactly the background is set. Each of them takes exactly one file as argument.

--bg-center: Center the file on the background. If it is too small, it will be surrounded by a black border
--bg-fill: Like --bg-scale but preserves aspect ratio by zooming the image until it fits. Either a horizontal or a vertical part of the image will be cut off
--bg-max: Like --bg-fill but scale the image to the maximum size that fits the screen with black borders on one side.
--bg-scale: Fit the file into the background without repeating it, cutting off stuff or using borders. But the aspect ratio is not preserved either
--bg-tile: Tile (repeat) the image in case it is too small for the screen

FORMAT SPECIFIERS

%f: Image path/filename
%h: Image height
%l: Total number of files in filelist
%m: Current mode
%n: Image name
%p: Number of image pixels
%P
%s: Image size in bytes
%t: Image format
%u: Number of current file
%w: Image width
%v: version

CONFIGURATION

has two config files: themes for theme definitions and keys for key bindings. It will try to read them from $XDG_CONFIG_HOME/feh/ which (when XDG_CONFIG_HOME is unset) defaults to ~/.config/feh/ If the files are not found in that directory, it will also try /etc/feh/

All config files treat lines starting with a Qq # character as comments. Note that mid-line comments are not supported.

THEMES CONFIG SYNTAX

This file allows the naming of option groups, called themes.

It takes entries of the form Qq Ar theme options ... , where theme is the name of the entry and options are the options which will be applied when the theme is used.

An example entry would be Qq imagemap -rVq --thumb-width 40 --thumb-height 30 .

You cane use this theme in two ways. Either call Qo -Timagemap *.jpg Qc or create a symbolic link to with the name of the theme you want it to use. So from the example above: Qo ln -s `which ` ~/bin/imagemap Qc . Now just run Qq imagemap *.jpg to use these options.

Note that you can split a theme over several lines by placing a backslash at the end of a line, like in the shell.

You can combine these themes with commandline options. An example fehrc is provided with a couple of cool example themes.

KEYS CONFIG SYNTAX

This file defines the key bindings. It has entries of the form Qq Ar action Op Ar key1 Op Ar key2 Op Ar key3 .

Each key is an X11 keysym name as shown by xev(1), like Qq Delete . It may optionally start with modifiers for things like Control, in which case key looks like mod - keysym Po for example Qq C-Delete for Ctrl+Delete or Qq C-1-Delete for Ctrl+Alt+Delete Pc

Available modifiers are C for Control S for Shift and 1 , 4 for Mod1 and Mod4

Specifying an action without any keys unbinds it (i.e. the default bindings are removed).

For a list of the action names, see Sx KEYS .

KEYS

In an image window, the following keys may be used (The strings in Bo square brackets Bc are the config action names )

a Bq toggle_actions: Toggle actions display (see --draw-actions )
A Bq toggle_aliasing: Enable/Disable anti-aliasing
c Bq toggle_caption: Caption entry mode. If --caption-path has been specified, then this enables caption editing. The caption at the bottom of the screen will turn yellow and can be edited. Hit return to confirm and save the caption, or escape to cancel editing. Note that you can insert an actual newline into the caption using Aq CTRL+return .
d Bq toggle_filenames: Toggle filename display (see --draw-filename )
f Bq save_filelist: Save the current filelist to a unique filename
h Bq toggle_pause: Pause/Continue the slideshow. When it is paused, it will not automatically change slides based on --slideshow-delay
i Bq toggle_info: Toggle info display (see --info )
m Bq toggle_menu: Show menu. Use the arrow keys and return to select items, Aq escape to close the menu.
n , Ao Space Ac , Ao Right Ac Bq next_img: Show next image
o Bq toggle_pointer: Toggle pointer visibility
p , Ao Backspace Ac , Ao Left Ac Bq prev_img: Show previous image
q , Ao Escape Ac Bq quit: Quit feh
r Bq reload_image: Reload current image. Useful for webcams
s Bq save_image: Save the current image to a unique filename
v Bq toggle_fullscreen: Toggle fullscreen
w Bq size_to_image: Change window size to fit current image size
x Bq close: Close current window
z Bq jump_random: Jump to a random position in the current filelist
< , > Bq orient_3 , orient_1: In place editing - rotate the images 90 degrees (counter)clockwise. The rotation is lossless, but may create artifacts in some image corners when used with JPEG images. Rotating in the reverse direction will make them go away. See jpegtran(1) for more about lossless JPEG rotation.
_ Bq flip: In place editing - vertical flip
| Bq mirror: In place editing - horizontal flip. Again, see jpegtran(1) for more information.
0 .. 9 Bq action_0 .. action_9: Execute the corresponding action (0 = --action , 1 = --action1 etc. )
Ao Return Ac Bq action_0: Run the command defined by --action
Ao home Ac Bq jump_first: Show first image
Ao end Ac Bq jump_last: Show last image
Ao page up Ac Bq jump_fwd: Go forward ~5% of the filelist
Ao page down Ac Bq jump_back: Go backward ~5% of the filelist
+ Bq reload_plus: Increase reload delay
- Bq reload_minus: Decrease reload delay
Ao delete Ac Bq remove: Remove current file from filelist
Ao CTRL+delete Ac Bq delete: Remove current file from filelist and delete it
Ao keypad left Ac , Ao Ctrl+Left Ac Bq scroll_left: Scroll to the left
Ao keypad right Ac , Ao Ctrl+Right Ac Bq scroll_right: Scroll to the right
Ao keypad up Ac , Ao Ctrl+Up Ac Bq scroll_up: Scroll up
Ao keypad down Ac , Ao Ctrl+Down Ac Bq scroll_down: Scroll down. Note that the scroll keys work without anti-aliasing for performance reasons, hit the render key after scrolling to antialias the image.
Aq Alt+Left Bq scroll_left_page: Scroll to the left by one page
Aq Alt+Right Bq scroll_right_page: Scroll to the right by one page
Aq Alt+Up Bq scroll_up_page: Scroll up by one page
Aq Alt+Down Bq scroll_down_page: Scroll down by one page
Ao keypad begin Ac Bq render: Antialias the image
Ao keypad + Ac , Ao Up Ac Bq zoom_in: Zoom in
Ao keypad - Ac , Ao Down Ac Bq zoom_out: Zoom out
Ao keypad * Ac Bq zoom_default: Zoom to 100%
Ao keypad / Ac Bq zoom_fit: Zoom to fit the window size

MENU KEYS

The following keys bindings are used for the feh menu:

Ao Escape Ac Bq menu_close: Close the menu
Ao Up Ac Bq menu_up: Highlight previous menu item
Ao Down Ac Bq menu_down: Highlight next menu item
Ao Left Ac Bq menu_parent: Highlight parent menu item
Ao Right Ac Bq menu_child: Highlight child menu item
Ao Return Ac , Ao Space Ac Bq menu_select: Select highlighted menu item

MOUSE ACTIONS

When viewing an image, by default mouse button 1 pans (moves the image around) or, when only clicked, moves to the next image (slideshow mode only) button 2 zooms Po click and drag left->right to zoom in, right->left to zoom out, click once to restore zoom to 100% Pc ; and mouse button 3 opens the menu.

CTRL+Button 1 blurs or sharpens the image (drag left to blur, right to sharpen) CTRL+Button 2 rotates the image around the center point.

A note about pan and zoom modes: In pan mode, if you reach a window border but haven't yet panned to the end of the image, will warp your cursor to the opposite border so you can continue panning.

When clicking the zoom button and immediately releasing it, the image will be back at 100% zoom. When clicking it and moving the mouse while holding the button down, the zoom will be continued at the previous zoom level. The zoom will always happen so that the pixel on which you entered the zoom mode remains stationary. So, to enlarge a specific part of an image, click the zoom button on that part.

SIGNALS

In slideshow mode, handles the following signals:

SIGUSR1: Switch to next image
SIGUSR2: Switch to previous image

USAGE EXAMPLES

Here are some examples of useful option combinations. See also: Aq http://feh.finalrewind.org/examples/

feh /opt/images: Show all images in /opt/images
feh -r /opt/images: Recursively show all images found in /opt/images and subdirectories
feh -rSfilename /opt/images: Same as above, but sort by filename. By default, feh will show files in the order it finds them on the hard disk, which is usually somewhat random.
feh -t -Sfilename -E 128 -y 128 -W 1024 /opt/images: Show 128x128 pixel thumbnails, limit window width to 1024 pixels.
feh -t -Sfilename -E 128 -y 128 -W 1024 -P -C /usr/share/fonts/truetype/ttf-dejavu/ -e DejaVuSans/8 /opt/images: Same as above, but enable thumbnail caching in ~/.thumbnails and use a smaller font.
feh -irFarial/14 -O index.jpg /opt/images: Make an index print of /opt/images and all directories below it, using 14 point Arial to write the image info under each thumbnail. Save the image as index.jpg and don't display it, just exit. Note that this even works without a running X server
feh --unloadable -r /opt/images: Print all unloadable images in /opt/images, recursively
feh -w /opt/images/holidays: Open each image in /opt/images/holidays in its own window
feh -FD5 -Sname /opt/images/presentation: Show the images in .../presentation, sorted by name, in fullscreen, automatically change to the next image after 5 seconds
feh -rSwidth -A Qo mv '%f' ~/images/'%n' Qc /opt/images: View all images in /opt/images and below, sorted by width, move an image to ~/image/image_name when enter is pressed
feh --start-at ./foo.jpg .: View all images in the current directory, starting with foo.jpg. All other images are still in the slideshow and can be viewed normally
feh --start-at foo.jpg: Same as above
feh --info "exifgrep '(Model|DateTimeOriginal|FNumber|ISO|Flash)' '%f' | cut -d . -f 4-" .: Show some EXIF information, extracted by exifprobe/exifgrep

DEPENDENCIES

requires the jpegtran binary (usually distributed in Qo libjpeg-progs Qc or similar ) for lossless rotation.

To view images from URLs such as http://, you need compiled with libcurl support (enabled by default). See the Sx VERSION section.

BUGS

In a Xinerama setup, fullscreen mode only works properly on screen 0. Set XINERAMA_SCREEN to the correct screen number or toggle fullscreen off, then on as a workaround.

Thumbnail mode is somewhat inefficient, and because of that not nearly as fast as it could be.

REPORTING BUGS

If you find a bug, please report it to Aq derf@finalrewind.org or via Aq http://github.com/derf/feh/issues . You are also welcome to direct any feh-related comments/questions/... to #feh on irc.oftc.net.

Please include the feh version Aq the output of Qq feh --version , steps to reproduce the bug and (if necessary), images to reproduce it.

FUTURE PLANS

Plans for the following releases:

Make zoom options more intuitive

LICENSE

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies of the Software and its documentation and acknowledgment shall be given in the documentation and software packages that this Software was used.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Current developer: Daniel Friesel Aq derf@finalrewind.org

Original author (no longer developing) Tom Gilbert Aq feh_sucks@linuxbrit.co.uk