LinuxReviws.org --get your your Linux knowledge
> Linux Reviews > Manual Pages (man) >

ccache


  1. ccache.1.man


1. ccache.1.man

Manpage of CCACHE

CCACHE

Section: ccache Manual (1)
Updated: 08/21/2011
Index Return to Main Contents
 

NAME

ccache - a fast C/C++ compiler cache  

SYNOPSIS

ccache [options]
ccache compiler [compiler options]
compiler [compiler options]                   (via symbolic link)
 

DESCRIPTION

ccache is a compiler cache. It speeds up recompilation by caching the result of previous compilations and detecting when the same compilation is being done again. Supported languages are C, C++, Objective-C and Objective-C++.

ccache has been carefully written to always produce exactly the same compiler output that you would get without the cache. The only way you should be able to tell that you are using ccache is the speed. Currently known exceptions to this goal are listed under BUGS. If you ever discover an undocumented case where ccache changes the output of your compiler, please let us know.  

Features

* Keeps statistics on hits/misses.

* Automatic cache size management.

* Can cache compilations that generate warnings.

* Easy installation.

* Low overhead.

* Optionally uses hard links where possible to avoid copies.

* Optionally compresses files in the cache to reduce disk space.
 

Limitations

* Only knows how to cache the compilation of a single C/C++/Objective-C/Objective-C++ file. Other types of compilations (multi-file compilation, linking, etc) will silently fall back to running the real compiler.

* Only works with GCC and compilers that behave similar enough.

* Some compiler flags are not supported. If such a flag is detected, ccache will silently fall back to running the real compiler.
 

RUN MODES

There are two ways to use ccache. You can either prefix your compilation commands with ccache or you can let ccache masquerade as the compiler by creating a symbolic link (named as the compiler) to ccache. The first method is most convenient if you just want to try out ccache or wish to use it for some specific projects. The second method is most useful for when you wish to use ccache for all your compilations.

To use the first method, just make sure that ccache is in your PATH.

To use the symlinks method, do something like this:

cp ccache /usr/local/bin/
ln -s ccache /usr/local/bin/gcc
ln -s ccache /usr/local/bin/g++
ln -s ccache /usr/local/bin/cc
ln -s ccache /usr/local/bin/c++

And so forth. This will work as long as the directory with symlinks comes before the path to the compiler (which is usually in /usr/bin). After installing you may wish to run lqwhich gccrq to make sure that the correct link is being used.


Warning

The technique of letting ccache masquerade as the compiler works well, but currently doesncqt interact well with other tools that do the same thing. See USING CCACHE WITH OTHER COMPILER WRAPPERS.


Warning

Do not use a hard link, use a symbolic link. A hard link will cause lqinterestingrq problems.

 

OPTIONS

These options only apply when you invoke ccache as lqccacherq. When invoked as a compiler (via a symlink as described in the previous section), the normal compiler options apply and you should refer to the compilercqs documentation.

-c, --cleanup

Clean up the cache by removing old cached files until the specified file number and cache size limits are not exceeded. This also recalculates the cache file count and size totals. Normally, itcqs not needed to initiate cleanup manually as ccache keeps the cache below the specified limits at runtime and keeps statistics up to date on each compilation. Forcing a cleanup is mostly useful if you manually modify the cache contents or believe that the cache size statistics may be inaccurate.

-C, --clear

Clear the entire cache, removing all cached files.

-F, --max-files=N

Set the maximum number of files allowed in the cache. The value is stored inside the cache directory and applies to all future compilations. Due to the way the value is stored the actual value used is always rounded down to the nearest multiple of 16.

-h, --help

Print an options summary page.

-M, --max-size=SIZE

Set the maximum size of the files stored in the cache. You can specify a value in gigabytes, megabytes or kilobytes by appending a G, M or K to the value. The default is gigabytes. The actual value stored is rounded down to the nearest multiple of 16 kilobytes.

-s, --show-stats

Print the current statistics summary for the cache.

-V, --version

Print version and copyright information.

-z, --zero-stats

Zero the cache statistics (but not the configured limits).
 

EXTRA OPTIONS

When run as a compiler, ccache usually just takes the same command line options as the compiler you are using. The only exception to this is the option --ccache-skip. That option can be used to tell ccache to avoid interpreting the next option in any way and to pass it along to the compiler as-is.

The reason this can be important is that ccache does need to parse the command line and determine what is an input filename and what is a compiler option, as it needs the input filename to determine the name of the resulting object file (among other things). The heuristic ccache uses when parsing the command line is that any argument that exists as a file is treated as an input file name. By using --ccache-skip you can force an option to not be treated as an input file name and instead be passed along to the compiler as a command line option.

Another case where --ccache-skip can be useful is if ccache interprets an option specially but shouldncqt, since the option has another meaning for your compiler than what ccache thinks.  

ENVIRONMENT VARIABLES

ccache uses a number of environment variables to control operation. In most cases you woncqt need any of these as the defaults will be fine.

CCACHE_BASEDIR

If you set the environment variable CCACHE_BASEDIR to an absolute path to a directory, ccache rewrites absolute paths into relative paths before computing the hash that identifies the compilation, but only for paths under the specified directory. See the discussion under COMPILING IN DIFFERENT DIRECTORIES.

CCACHE_CC

You can optionally set CCACHE_CC to force the name of the compiler to use. If you doncqt do this then ccache works it out from the command line.

CCACHE_COMPILERCHECK

By default, ccache includes the modification time (lqmtimerq) and size of the compiler in the hash to ensure that results retrieved from the cache are accurate. The CCACHE_COMPILERCHECK environment variable can be used to select another strategy. Possible values are:

content

Hash the content of the compiler binary. This makes ccache very slightly slower compared to the mtime setting, but makes it cope better with compiler upgrades during a build bootstrapping process.

mtime

Hash the compilercqs mtime and size, which is fast. This is the default.

none

Doncqt hash anything. This may be good for situations where you can safely use the cached results even though the compilercqs mtime or size has changed (e.g. if the compiler is built as part of your build system and the compilercqs source has not changed, or if the compiler only has changes that doncqt affect code generation). You should only use the none setting if you know what you are doing.

a command string

Hash the standard output and standard error output of the specified command. The string will be split on whitespace to find out the command and arguments to run. No other interpretation of the command string will be done, except that the special word lq%compiler%rq will be replaced with the path to the compiler. Several commands can be specified with semicolon as separator. Examples:

*

%compiler% -v

*

%compiler% -dumpmachine; %compiler% -dumpversion

You should make sure that the specified command is as fast as possible since it will be run once for each ccache invocation.

Identifying the compiler using a command is useful if you want to avoid cache misses when the compiler has been rebuilt but not changed.

Another case is when the compiler (as seen by ccache) actually isncqt the real compiler but another compiler wrapper --- in that case, the default mtime method will hash the mtime and size of the other compiler wrapper, which means that ccache woncqt be able to detect a compiler upgrade. Using a suitable command to identify the compiler is thus safer, but itcqs also slower, so you should consider continue using the mtime method in combination with CCACHE_PREFIX if possible. See USING CCACHE WITH OTHER COMPILER WRAPPERS.

CCACHE_COMPRESS

If you set the environment variable CCACHE_COMPRESS then ccache will compress object files and other compiler output it puts in the cache. However, this setting has no effect on how files are retrieved from the cache; compressed and uncompressed results will still be usable regardless of this setting.

CCACHE_CPP2

If you set the environment variable CCACHE_CPP2 then ccache will not use the optimisation of avoiding the second call to the preprocessor by compiling the preprocessed output that was used for finding the hash in the case of a cache miss. This is primarily a debugging option, although it is possible that some unusual compilers will have problems with the intermediate filename extensions used in this optimisation, in which case this option could allow ccache to be used anyway.

CCACHE_DETECT_SHEBANG

The CCACHE_DETECT_SHEBANG environment variable only has meaning on Windows. It instructs ccache to open the executable file to detect the #!/bin/sh string, in which case ccache will search for sh.exe in PATH and use that to launch the executable.

CCACHE_DIR

The CCACHE_DIR environment variable specifies where ccache will keep its cached compiler output. The default is $HOME/.ccache.

CCACHE_DISABLE

If you set the environment variable CCACHE_DISABLE then ccache will just call the real compiler, bypassing the cache completely.

CCACHE_EXTENSION

ccache tries to automatically determine the extension to use for intermediate preprocessor files based on the type of file being compiled. Unfortunately this sometimes doesncqt work, for example when using the lqaCCrq compiler on HP-UX. On systems like this you can use the CCACHE_EXTENSION option to override the default. On HP-UX set this environment variable to i if you use the lqaCCrq compiler.

CCACHE_EXTRAFILES

If you set the environment variable CCACHE_EXTRAFILES to a list of paths then ccache will include the contents of those files when calculating the hash sum. The list separator is semicolon in Windows systems and colon on other systems.

CCACHE_HARDLINK

If you set the environment variable CCACHE_HARDLINK then ccache will attempt to use hard links from the cache directory when creating the compiler output rather than using a file copy. Using hard links may be slightly faster in some situations, but can confuse programs like lqmakerq that rely on modification times. Another thing to keep in mind is that if the resulting object file is modified in any way, this corrupts the cached object file as well. Hard links are never made for compressed cache files. This means that you should not set the CCACHE_COMPRESS variable if you want to use hard links.

CCACHE_HASHDIR

This tells ccache to hash the current working directory when calculating the hash that is used to distinguish two compilations. This prevents a problem with the storage of the current working directory in the debug info of a object file, which can lead ccache to give a cached object file that has the working directory in the debug info set incorrectly. This option is off by default as the incorrect setting of this debug info rarely causes problems. If you strike problems with GDB not using the correct directory then enable this option.

CCACHE_LOGFILE

If you set the CCACHE_LOGFILE environment variable then ccache will write information on what it is doing to the specified file. This is useful for tracking down problems.

CCACHE_NLEVELS

The environment variable CCACHE_NLEVELS allows you to choose the number of levels of hash in the cache directory. The default is 2. The minimum is 1 and the maximum is 8.

CCACHE_NODIRECT

If you set the environment variable CCACHE_NODIRECT then ccache will not use the direct mode.

CCACHE_NOSTATS

If you set the environment variable CCACHE_NOSTATS then ccache will not update the statistics files on each compilation.

CCACHE_PATH

You can optionally set CCACHE_PATH to a colon-separated path where ccache will look for the real compilers. If you doncqt do this then ccache will look for the first executable matching the compiler name in the normal PATH that isncqt a symbolic link to ccache itself.

CCACHE_PREFIX

This option adds a prefix to the command line that ccache runs when invoking the compiler. Also see the section below on using ccache with lqdistccrq.

CCACHE_READONLY

The CCACHE_READONLY environment variable tells ccache to attempt to use existing cached object files, but not to try to add anything new to the cache. If you are using this because your CCACHE_DIR is read-only, then you may find that you also need to set CCACHE_TEMPDIR as otherwise ccache will fail to create temporary files.

CCACHE_RECACHE

This forces ccache to not use any cached results, even if it finds them. New results are still cached, but existing cache entries are ignored.

CCACHE_SLOPPINESS

By default, ccache tries to give as few false cache hits as possible. However, in certain situations itcqs possible that you know things that ccache cancqt take for granted. The CCACHE_SLOPPINESS environment variable makes it possible to tell ccache to relax some checks in order to increase the hit rate. The value should be a comma-separated string with options. Available options are:

file_macro

Ignore __FILE__ being present in the source.

include_file_mtime

Doncqt check the modification time of include files in the direct mode.

time_macros

Ignore __DATE__ and __TIME__ being present in the source code.

See the discussion under TROUBLESHOOTING for more information.

CCACHE_TEMPDIR

The CCACHE_TEMPDIR environment variable specifies where ccache will put temporary files. The default is $CCACHE_DIR/tmp.


Note
In previous versions of ccache, CCACHE_TEMPDIR had to be on the same filesystem as the CCACHE_DIR path, but this requirement has been relaxed.)

CCACHE_UMASK

This sets the umask for ccache and all child processes (such as the compiler). This is mostly useful when you wish to share your cache with other users. Note that this also affects the file permissions set on the object files created from your compilations.

CCACHE_UNIFY

If you set the environment variable CCACHE_UNIFY then ccache will use a C/C++ unifier when hashing the preprocessor output if the -g option is not used. The unifier is slower than a normal hash, so setting this environment variable loses a little bit of speed, but it means that ccache can take advantage of not recompiling when the changes to the source code consist of reformatting only. Note that using CCACHE_UNIFY changes the hash, so cached compilations with CCACHE_UNIFY set cannot be used when CCACHE_UNIFY is not set and vice versa. The reason the unifier is off by default is that it can give incorrect line number information in compiler warning messages. Also note that enabling the unifier implies turning off the direct mode.
 

CACHE SIZE MANAGEMENT

By default ccache has a one gigabyte limit on the total size of files in the cache and no maximum number of files. You can set different limits using the -M/--max-size and -F/--max-files options. Use ccache -s/--show-stats to see the cache size and the currently configured limits (in addition to other various statistics).  

CACHE COMPRESSION

ccache can optionally compress all files it puts into the cache using the compression library zlib. While this involves a negligible performance slowdown, it significantly increases the number of files that fit in the cache. You can turn on compression by setting the CCACHE_COMPRESS environment variable.  

HOW CCACHE WORKS

The basic idea is to detect when you are compiling exactly the same code a second time and reuse the previously produced output. The detection is done by hashing different kinds of information that should be unique for the compilation and then using the hash sum to identify the cached output. ccache uses MD4, a very fast cryptographic hash algorithm, for the hashing. (MD4 is nowadays too weak to be useful in cryptographic contexts, but it should be safe enough to be used to identify recompilations.) On a cache hit, ccache is able to supply all of the correct compiler outputs (including all warnings, dependency file, etc) from the cache.

ccache has two ways of doing the detection:

* the direct mode, where ccache hashes the source code and include files directly

* the preprocessor mode, where ccache runs the preprocessor on the source code and hashes the result

The direct mode is generally faster since running the preprocessor has some overhead.  

Common hashed information

For both modes, the following information is included in the hash:

* the extension used by the compiler for a file with preprocessor output (normally .i for C code and .ii for C++ code)

* the compilercqs size and modification time (or other compiler-specific information specified by CCACHE_COMPILERCHECK)

* the name of the compiler

* the current directory (if CCACHE_HASHDIR is set)

* contents of files specified by CCACHE_EXTRAFILES (if any)
 

The direct mode

In the direct mode, the hash is formed of the common information and:

* the input source file

* the command line options

Based on the hash, a data structure called lqmanifestrq is looked up in the cache. The manifest contains:

* references to cached compilation results (object file, dependency file, etc) that were produced by previous compilations that matched the hash

* paths to the include files that were read at the time the compilation results were stored in the cache

* hash sums of the include files at the time the compilation results were stored in the cache

The current contents of the include files are then hashed and compared to the information in the manifest. If there is a match, ccache knows the result of the compilation. If there is no match, ccache falls back to running the preprocessor. The output from the preprocessor is parsed to find the include files that were read. The paths and hash sums of those include files are then stored in the manifest along with information about the produced compilation result.

The direct mode will be disabled if any of the following holds:

* the environment variable CCACHE_NODIRECT is set

* a modification time of one of the include files is too new (needed to avoid a race condition)

* the unifier is enabled (the environment variable CCACHE_UNIFY is set)

* a compiler option not supported by the direct mode is used:

* a -Wp,X compiler option other than -Wp,-MD,path and -Wp,-MMD,path

*

-Xpreprocessor

* the string lq__TIME__rq is present outside comments and string literals in the source code
 

The preprocessor mode

In the preprocessor mode, the hash is formed of the common information and:

* the preprocessor output from running the compiler with -E

* the command line options except options that affect include files (-I, -include, -D, etc; the theory is that these options will change the preprocessor output if they have any effect at all)

* any standard error output generated by the preprocessor

Based on the hash, the cached compilation result can be looked up directly in the cache.  

COMPILING IN DIFFERENT DIRECTORIES

Some information included in the hash that identifies a unique compilation may contain absolute paths:

* The preprocessed source code may contain absolute paths to include files if the compiler option -g is used or if absolute paths are given to -I and similar compiler options.

* Paths specified by compiler options (such as -I, -MF, etc) may be absolute.

* The source code file path may be absolute, and that path may substituted for __FILE__ macros in the source code or included in warnings emitted to standard error by the preprocessor.

This means that if you compile the same code in different locations, you cancqt share compilation results between the different build directories since you get cache misses because of the absolute build directory paths that are part of the hash. To mitigate this problem, you can specify a lqbase directoryrq by setting the CCACHE_BASEDIR variable to an absolute path to the directory. ccache will then rewrite absolute paths that are under the base directory (i.e., paths that have the base directory as a prefix) to relative paths when constructing the hash. A typical path to use as the base directory is your home directory or another directory that is a parent of your build directories. (Doncqt use / as the base directory since that will make ccache also rewrite paths to system header files, which doesncqt gain anything.)

The drawbacks of using CCACHE_BASEDIR are:

* If you specify an absolute path to the source code file, __FILE__ macros will be expanded to a relative path instead.

* If you specify an absolute path to the source code file and compile with -g, the source code path stored in the object file may point to the wrong directory, which may prevent debuggers like GDB from finding the source code. Sometimes, a work-around is to change the directory explicitly with the lqcdrq command in GDB.
 

PRECOMPILED HEADERS

ccache has support for GCCcqs precompiled headers. However, you have to do some things to make it work properly:

* You must set CCACHE_SLOPPINESS to time_macros. The reason is that ccache cancqt tell whether __TIME__ or __DATE__ is used when using a precompiled header.

* You must either:

* use the -include compiler option to include the precompiled header (i.e., doncqt use #include in the source code to include the header); or

* add the -fpch-preprocess compiler option when compiling.

If you doncqt do this, either the non-precompiled version of the header file will be used (if available) or ccache will fall back to running the real compiler and increase the statistics counter lqpreprocessor errorrq (if the non-precompiled header file is not available).

 

SHARING A CACHE

A group of developers can increase the cache hit rate by sharing a cache directory. To share a cache without unpleasant side effects, the following conditions should to be met:

* Use the same CCACHE_DIR environment variable setting.

* Unset the CCACHE_HARDLINK environment variable.

* Make sure everyone sets the CCACHE_UMASK environment variable to 002. This ensures that cached files are accessible to everyone in the group.

* Make sure that all users have write permission in the entire cache directory (and that you trust all users of the shared cache).

* Make sure that the setgid bit is set on all directories in the cache. This tells the filesystem to inherit group ownership for new directories. The command lqfind $CCACHE_DIR -type d | xargs chmod g+srq might be useful for this.

The reason to avoid the hard link mode is that the hard links cause unwanted side effects, as all links to a cached file share the filecqs modification timestamp. This results in false dependencies to be triggered by timestamp-based build systems whenever another user links to an existing file. Typically, users will see that their libraries and binaries are relinked without reason.

You may also want to make sure that the developers have CCACHE_BASEDIR set appropriately, as discussed in the previous section.  

SHARING A CACHE ON NFS

It is possible to put the cache directory on an NFS filesystem (or similar filesystems), but keep in mind that:

* Having the cache on NFS may slow down compilation. Make sure to do some benchmarking to see if itcqs worth it.

* ccache hasncqt been tested very thoroughly on NFS.

A tip is to set CCACHE_TEMPDIR to a directory on the local host to avoid NFS traffic for temporary files.  

USING CCACHE WITH OTHER COMPILER WRAPPERS

The recommended way of combining ccache with another compiler wrapper (such as lqdistccrq) is by using the CCACHE_PREFIX option. You just need to set the environment variable CCACHE_PREFIX to the name of the wrapper (e.g. distcc) and ccache will prefix the command line with the specified command when running the compiler.

Unless you set CCACHE_COMPILERCHECK to a suitable command (see the description of that configuration option), it is not recommended to use the form ccache anotherwrapper compiler args as the compilation command. Itcqs also not recommended to use the masquerading technique for the other compiler wrapper. The reason is that by default, ccache will in both cases hash the mtime and size of the other wrapper instead of the real compiler, which means that:

* Compiler upgrades will not be detected properly.

* The cached results will not be shared between compilations with and without the other wrapper.

Another minor thing is that if CCACHE_PREFIX is not used, ccache will needlessly invoke the other wrapper when running the preprocessor.  

BUGS

* ccache doesncqt handle the GNU Assemblercqs .incbin directive correctly. This directive can be embedded in the source code inside an asm statement in order to include a file verbatim in the object file. If the included file is modified, ccache doesncqt pick up the change since the inclusion isncqt done by the preprocessor. A workaround of this problem is to set CCACHE_EXTRAFILES to the path of the included file.
 

TROUBLESHOOTING

 

General

A general tip for getting information about what ccache is doing is to enable debug logging by setting CCACHE_LOGFILE. The log contains executed commands, important decisions that ccache makes, read and written files, etc. Another way of keeping track of what is happening is to check the output of ccache -s.  

Performance

ccache has been written to perform well out of the box, but sometimes you may have to do some adjustments of how you use the compiler and ccache in order to improve performance.

Since ccache works best when I/O is fast, put the cache directory on a fast storage device if possible. Having lots of free memory so that files in the cache directory stay in the disk cache is also preferrable.

A good way of monitoring how well ccache works is to run ccache -s before and after your build and then compare the statistics counters. Here are some common problems and what may be done to increase the hit rate:

* If lqcache hit (preprocessed)rq has been incremented instead of lqcache hit (direct)rq, ccache has fallen back to preprocessor mode, which is generally slower. Some possible reasons are:

* The source code has been modified in such a way that the preprocessor output is not affected.

* Compiler arguments that are hashed in the direct mode but not in the preprocessor mode have changed (-I, -include, -D, etc) and they didncqt affect the preprocessor output.

* The compiler option -Xpreprocessor or -Wp,X (except -Wp,-MD,path and Wp,-MMD,path) is used.

* This was the first compilation with a new value of CCACHE_BASEDIR.

* A modification time of one of the include files is too new (created the same second as the compilation is being done). This check is made to avoid a race condition. To fix this, create the include file earlier in the build process, if possible, or set CCACHE_SLOPPINESS to include_file_mtime if you are willing to take the risk. (The race condition consists of these events: the preprocessor is run; an include file is modified by someone; the new include file is hashed by ccache; the real compiler is run on the preprocessorcqs output, which contains data from the old header file; the wrong object file is stored in the cache.)

* The __TIME__ preprocessor macro is (potentially) being used. ccache turns off direct mode if lq__TIME__rq is present in the source code outside comments and string literals. This is done as a safety measure since the string indicates that a __TIME__ macro may affect the output. (To be sure, ccache would have to run the preprocessor, but the sole point of the direct mode is to avoid that.) If you know that __TIME__ isncqt used in practise, or doncqt care if ccache produces objects where __TIME__ is expanded to something in the past, you can set CCACHE_SLOPPINESS to time_macros.

* The __DATE__ preprocessor macro is (potentially) being used and the date has changed. This is similar to how __TIME__ is handled. If lq__DATE__rq is present in the source code outside comments and string literals, ccache hashes the current date in order to be able to produce the correct object file if the __DATE__ macro affects the output. If you know that __DATE__ isncqt used in practise, or doncqt care if ccache produces objects where __DATE__ is expanded to something in the past, you can set CCACHE_SLOPPINESS to time_macros.

* The __FILE__ preprocessor macro is (potentially) being used and the file path has changed. If lq__FILE__rq is present in the source code outside comments and string literals, ccache hashes the current input file path in order to be able to produce the correct object file if the __FILE__ macro affects the output. If you know that __FILE__ isncqt used in practise, or doncqt care if ccache produces objects where __FILE__ is expanded to the wrong path, you can set CCACHE_SLOPPINESS to file_macro.

* If lqcache missrq has been incremented even though the same code has been compiled and cached before, ccache has either detected that something has changed anyway or a cleanup has been performed (either explicitly or implicitly when a cache limit has been reached). Some perhaps unobvious things that may result in a cache miss are usage of __TIME__ or __DATE__ macros, or use of automatically generated code that contains a timestamp, build counter or other volatile information.

* If lqmultiple source filesrq has been incremented, itcqs an indication that the compiler has been invoked on several source code files at once. ccache doesncqt support that. Compile the source code files separately if possible.

* If lqunsupported compiler optionrq has been incremented, enable debug logging and check which option was rejected.

* If lqpreprocessor errorrq has been incremented, one possible reason is that precompiled headers are being used. See PRECOMPILED HEADERS for how to remedy this.

* If lqcancqt use precompiled headerrq has been incremented, see PRECOMPILED HEADERS.
 

Errors when compiling with ccache

If compilation doesncqt work with ccache, but it works without it, one possible reason is that the compiler cancqt compile preprocessed output correctly. A workaround that may work is to set CCACHE_CPP2. This will make cache misses slower, though, so it is better to find and fix the root cause.  

Corrupt object files

It should be noted that ccache is susceptible to general storage problems. If a bad object file sneaks into the cache for some reason, it will of course stay bad. Some possible reasons for erroneous object files are bad hardware (disk drive, disk controller, memory, etc), buggy drivers or file systems, a bad CCACHE_PREFIX command or compiler wrapper. If this happens, you can either find out which object file is broken by reading the debug log and then delete the bad object file from the cache, or you can simply clear the whole cache with ccache -C if you doncqt mind losing other cached results.

There are no reported issues about ccache producing broken object files reproducibly. That doesncqt mean it cancqt happen, so if you find a repeatable case, please report it.  

MORE INFORMATION

Credits, mailing list information, bug reporting instructions, source code, etc, can be found on ccachecqs web site: http://ccache.samba.org.  

AUTHOR

ccache was originally written by Andrew Tridgell and is currently developed and maintained by Joel Rosdahl. See AUTHORS.txt or AUTHORS and http://ccache.samba.org/credits for a list of contributors.


 

Index

NAME
SYNOPSIS
DESCRIPTION
Features
Limitations
RUN MODES
OPTIONS
EXTRA OPTIONS
ENVIRONMENT VARIABLES
CACHE SIZE MANAGEMENT
CACHE COMPRESSION
HOW CCACHE WORKS
Common hashed information
The direct mode
The preprocessor mode
COMPILING IN DIFFERENT DIRECTORIES
PRECOMPILED HEADERS
SHARING A CACHE
SHARING A CACHE ON NFS
USING CCACHE WITH OTHER COMPILER WRAPPERS
BUGS
TROUBLESHOOTING
General
Performance
Errors when compiling with ccache
Corrupt object files
MORE INFORMATION
AUTHOR

This document was created by man2html using the manual pages.
Time: 17:30:27 GMT, October 23, 2013

Meet new people