# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

# XFS font server (not used with Gentoo)
#	FontPath   "unix/:-1"
	FontPath   "tcp/192.168.0.1:7100"
#	FontPath   "/usr/X11R6/lib/X11/fonts/misc"
#	FontPath   "/usr/X11R6/lib/X11/fonts/Type1"
#	FontPath   "/usr/X11R6/lib/X11/fonts/truetype"
#	FontPath   "/usr/X11R6/lib/X11/fonts/TTF"
#	FontPath   "/usr/X11R6/lib/X11/fonts/Speedo"
# Makes GTK apps look rather ugly
#       FontPath   "/usr/X11R6/lib/X11/fonts/100dpi"
#  	FontPath   "/usr/X11R6/lib/X11/fonts/75dpi"
#	FontPath   "/usr/share/fonts/afms/adobe"
#       FontPath   "/usr/share/fonts/default/TrueType"
#       FontPath   "/usr/share/fonts/default/Type1"
#       FontPath   "/usr/share/fonts/default/ghostscript"

EndSection

Section "Module"
#        Load  "GLcore"
        Load  "dbe"
#        Load  "extmod"
	SubSection "extmod"
	  Option "omit xfree86-dga"
	EndSubSection
#	Load "fbdevhw"
	Load "dri"
        Load  "glx"
        Load  "record"
	Load "type1"
	Load "freetype"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"logicdo"
	Option	"XkbLayout"	"no"
	#Option	"XkbVariant"	"nodeadkeys"
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
	Identifier	"Mouse0"
	# Modified by mouseconfig
	Driver		"mouse"
	Option		"Device"		"/dev/mouse"
	Option		"Protocol"		"MouseManPlusPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"ZAxisMapping"		"5 6"
	Option		"Buttons"		"6"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
	HorizSync   30-85
	VertRefresh 47-160

# Virker ikke spesielt bra
#	ModeLine "320x240"	15.750 320 336 384 400
#					240 245 246 262 Doublescan
#
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
#
# Virker helt greit, med svart stripe 
#Modeline "320x240"     12.588 320  336  384  400   
#					240  245  246  262 Doublescan

# 320x240 @ 72 Hz, 36.5 kHz hsync
	Modeline "320x240"     15.750 320  336  384  400   
					240  244  246  262 Doublescan

# i bruk: 
#	ModeLine "320x200"	12.588 320 336 384 400
# 				       200 204 205 225 Doublescan


# Hansol 910A innstillinger

	ModeLine "640x480"   25.175	640 656 752 800 480 490 492 525 -hsync -vsync
	ModeLine "640x480"   31.5	640 656 720 840 480 481 484 500 -hsync -vsync
	ModeLine "640x480"   36 	640 696 752 832 480 481 484 509 -hsync -vsync
	
	ModeLine "800x600"   40		800 840 968 1056 600 601 605 628 +hsync +vsync
	ModeLine "800x600"   49.5	800 816 896 1056 600 601 604 625 +hsync +vsync
	ModeLine "800x600"   56.25	800 832 896 1048 600 601 604 631 +hsync +vsync
	
	ModeLine "1024x768"  65		1024 1048 1184 1344 768 771 777 806 -hsync -vsync
	ModeLine "1024x768"  78.75      1024 1040 1136 1312 768 769 772 800 +hsync +vsync
	ModeLine "1024x768"  94.5       1024 1072 1168 1376 768 769 772 808 +hsync +vsync
	
	ModeLine "1280x1024" 108	1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
	ModeLine "1280x1024" 135	1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
	
#	ModeLine "1600x1200" 162	1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
#	ModeLine "1600x1200" 175	1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync

EndSection

Section "Device"
	# no known options
	Identifier   "nvidia"
	Driver "nvidia"
        Screen 0
        Option "TwinView"
	Option "TwinViewOrientation" "RightOf"
        Option "SecondMonitorHorizSync"     "30-50"
        Option "SecondMonitorVertRefresh"   "60"
        Option "MetaModes" "1280x1024, 1024x768; 800x600, 800x600; 640x480, 640x480;"
        Option "TVStandard" "PAL-G"
        VendorName   "Hercules"
        BoardName     "Hercules"
	Option		"DPMS"	"on"        
EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "nvidia"
        Monitor      "Monitor0"
#
#	Many programs (like zsnes) perform better with 16
	DefaultDepth	24
#	DefaultDepth	16
	Subsection "Display"
		Depth 16
		Modes "1024x768" "800x600"
	EndSubsection

	Subsection "Display"
        	Depth       24
                Modes       "1280x1024" "1024x768" "800x600" "640x480" "320x200" 
#		Modes       "1024x768" "320x240"

#ViewPort    0 0
	EndSubsection

EndSection

Section "DRI"
	Mode 0666
EndSection